AirLive POE-200CAMv2 - Manual (Page 39)

AirLive POE‐200CAMv2 User’s Manual
38
6.2.8 Setting
Sensor input 1: Click it on for using external sensor which is connected to sensor input1 of the camera I / O
port.
¾ Trigger condition: Select High signal output and Low signal output as your alarm.
¾ Camera move: Pull down the window to select the camera preset position.
6.2.9 Alarm buffer
You can set the Pre-alarm image and audio (the image and audio before the alarm detection) and the Post -
alarm image and audio. These can be set when Alarm sending FTP client setting menu or Image memory
setting menu is set to On, and besides when Use alarm buffer is selected.