AirLive OD-2025PHD - Manual (Page 49)

4. Administrating the Device
AirLive OD-2025HD
/OD-2025PHD User’s Manual
43
4.2.3 PTZ Setting
User can configure the RS-485 protocol in this page. RS-485 is an communication
interface, in most situation, it is to be used for controlling the scanner.
z
Camera Protocol:
This device can connect to a PTZ camera or speed dome camera and controls them
thru RS485 interface.
z
Camera Address:
This is the camera ID set in PTZ camera or speed dome camera. Note that please DO
NOT change the default value if unnecessary. If so, user needs to check and set value
properly for both sides.
z
Baud rate:
This is the communication speed between network module and P/T scanner.