AirLive NAS-235 - Manual (Page 46)

5. Administration
41 AirLive NAS-235 User’s Manual
Identification
Name If you wish, you can change the name of the NAS Server. Note that
punctuation and other special characters (e.g. * " / \ [ ] : ; | = , + ? < >
' ` ( ) # $ %) cannot be used in the name.
Comment Enter a comment if you wish (e.g. the location of the NAS Server).
Note that special characters (e.g. | \ , ' : ") cannot be used in it.
Workgroup Name This should match the "Workgroup Name" on your PCs. If the
Workgroup name does not match, access to the NAS Server is still
possible, but the NAS Server will not appear when you click the
"Browse Network" button (for example, when adding a Network
Printer). Note that punctuation and other special characters (e.g. / ] \
[ : ; | = , + * ? " > < ' ` ) cannot be used in the name.
Printer Name Specify one name for the Printer Server. After you plug one printer
into one USB port, the Printer Name will occur in Network
Neighborhood and you can click it to install the Printer Server.
Date & Time
Time Zone Select the correct time zone for your location.
Change System
Date and Time as
Following
Check this box for data and time update. The date and time setting
is not sent to the server without check this box.
Local Date Enter the local date. The NAS Server will set it own calendar
according to the date you provide.
Local Time Enter the local time at your location. The NAS Server will set its own
clock according to the time you provide. Remember that this is not
sent to the Server until you click "OK".