AirLive NAS-235 - Manual (Page 10)

2. Getting Familiar with your NAS
5 AirLive NAS-235 User’s Manual
2.2. Rear Panel
Power Switch This is a spring-loaded "Soft Switch".
If power is Off, press once to turn On.
If power is On, press once to start the Shutdown
sequence. During Shutdown, the Ready LED will blink.
When Shutdown is completed, all LEDs will turn off.
Power Input
Connect the supplied power adapter here.
Reset Button
(IP/Password)
This button has 2 functions:

If the NAS's IP Address is lost, press and hold this
button for 2 seconds. The IP Address will be set to
the default (DHCP client) and it will beep once to
indicate the reset has occurred

If the NAS
administrator’s password is lost, press
and hold this button for 10 seconds. The password
will then be cleared (no password), and the NAS
will beep twice.