AirLive MFP-101U User Manual
Page 57
Wireless Function: You can select to “Enable” or “Disable” the wireless
function manually. If you manually enable wireless function, the MFP Server’s
wireless LAN will be always enabled and Ethernet will be always disabled. If
you manually disable the wireless function, the MFP Server’s wireless LAN
will be always disabled and Ethernet will be always enabled. You can also
select “Auto” to let the MFP Server automatically decide to enable or disable
the wireless function. The MFP Server only can work in either Ethernet or
wireless LAN mode. It cannot work in both Ethernet and wireless LAN mode
at the same time. When the MFP Server starts up, it will auto-detect if the LAN
port is connected to an active network by an Ethernet cable. If the MFP Server
is connected to an active network by Ethernet cable when starting up, the
MFP Server will run in Ethernet mode. If the MFP Server is not connected to
an active network by Ethernet cable when starting up, the MFP Server will run
in wireless LAN mode. The MFP Server default is in “Auto” mode.
Domain Country: The wireless channels are different from country to country.
Generally, the channels are from 1 to 11 in USA and from 1 to 13 in Europe.
The operating channel will be set to the MFP Server before importing. If you
are in different country, please make sure that you have set the available
channels according to your location.
50 AirLive WFP-101U User’s Manual