AirLive MFP-101U User Manual
Page 23
Note: If the Windows XP Firewall in your system has been enabled, the
MFP Server will automatically open ports for the MFP Server programs
smoothly run in your system. It will not cause abnormal behaviors or
unsafe on your system.
15. Choose if you want to run the “MFP Manager” utility automatically when
Windows starts. It is recommended to enable the setting.
16.
The default wireless setting is “Auto” mode. The MFP Server will detect if
the MFP Server is connected to a wired LAN network through the attached
Ethernet cable. If yes, it will work in wired network. To enable the wireless
setting, please remove the Ethernet cable. For more detailed information
about wireless setting, please refer to Section 7.8.
16 AirLive WFP-101U User’s Manual