6 hardware installation, Using mu-7000av, 1 usb enclosure – AirLive MU-7000AVs User Manual
Page 9: 1 usb otb (one touch backup)

2. Easy Installation Guide // 3. Using MU-7000AV
2.6 Hardware Installation
Step1 Step2
Step3 Step4
3. Using MU-7000AV
3.1 USB Enclosure
1. Connect the power cable then power on it (push the power button for 2~4 seconds).
2. Connect the USB cable to your computer.
3. When your hard disk is detected by your computer, LED1 is on.
3.1.1 USB OTB (One Touch Backup)
1. Install the Setup_v1.5.exe from OTB in the Software Install CD.
2. Setup the folder or partition you want to copy, and push the button. The OTB function will start
automatically.
Note: If you plug the MU-7000AV into computer with USB, media file playback and NDAS
will not work.
3
AirLive MU-7000AV User’s Manual