2 features, 3 system requirements – AirLive IP-200PHD User Manual
Page 7

1. Introduction
 
 
 
 
 
 
AirLive IP-200PHD User’s Manual 
6
1.2 Features
z Easy installation with setup wizard (IP Wizard II) 
z UPnP device discovery and NAT router transversal for easy installation 
z Dynamic IP Service, DIPS®, to search your IP camera from Internet easily 
z H.264, MPEG4 and JPEG triple compression simultaneously 
z 2 Mega-pixel resolution 
z Up to 9-profile encoder simultaneously 
z 2 Mega-pixel or 720P mode selectable 
z Up to 30 fps for 720P mode 
z Up to 15 fps for 2 Mega-pixel mode 
z UDP / TCP / HTTP protocols selectable 
z Passive PoE support 
z 3GPP for 3G mobile remote application 
z Digital 
zoom
z Built-in
microphone
z Audio
line
out
z Two-way
audio
z Intelligent motion detection up to 10 zones 
z Go to preset once motion triggered 
z Image transmission using an FTP or e-mail for event 
z DDNS and PPPoE 
z Multi-channel control software for surveillance application 
z On-line firmware upgrade 
1.3 System Requirements
z Microsoft
Internet
Explorer 6.0 or later
z Microsoft Media Player 11.0 or later (to playback recorded file) 
z VGA Monitor resolution 1280 x 1024 or higher 
z Pentium-4 3.6 GHz or higher 
z Memory Size: 1GB or more 
z Windows XP, Vista, 7 
