AirLive IP-200PHD - Manual (Page 46)

4. Monitor the Image Section
45
AirLive IP-200PHD User’s Manual
To turn on or off Power LED.
Log:
User can check the system log information of the device, including the Main
Info, Appended Info, Operator IP, and so on …
Reload:
Click this button; user can refresh the log information of the device.
4.4.2 Date & Time
You can setup the device or make it synchronized with PC or remote NTP
server. Also, you may select your time zone in order to synchronize time
locally.
Server Date & Time:
Displays the date and time of the device.
PC Time:
Displays the date and time of the connected PC.
Adjust:
- Synchronize with PC:
Click this option to enable time synchronization with PC time.
- Manual setting:
Click this option to set time and date manually.
- Synchronize with NTP:
Click this option if you want to synchronize the device’s date and time with
those of time server called NTP server (Network Time Protocol).
NTP Server: Type the host name or IP address or domain name of the
NTP server.
NTP sync. Interval: Select an interval between 1 and 23 hours at
which you want to adjust the device’s time referring to NTP server
Time zone: