AirLive IP-200PHD - Manual (Page 56)

4. Monitor the Image Section
55
AirLive IP-200PHD User’s Manual
SMTP Server:
Type the SMTP server name or the IP address of the SMTP server.
Test:
Send a test mail to mail server to check this account is available or not.
SMTP Port:
Set port number of SMTP service.
SSL:
Enable SSL function or not.
SMTP Authentication:
Select the authentication required when you send an e-mail.
Disable: if no authentication is required when an e-mail is sent.
Enable: if authentication is required when an e-mail is sent.
Authentication User name:
Type the user name for the SMTP server if Authentication is Enable.
Authentication Password:
Type the password for the SMTP server if Authentication is Enable.
E-mail To:
Type the receiver’s e-mail address.
E-mail From:
Type the sender’s E-mail address. This address is used for reply e-mails.
E-mail Subject:
Type the subject/title of the e-mail.
4.6.4 Object Detection
Use this menu to specify motion detection window 1 to window 10 and set the
conditions for detection while observing a captured image.