AirLive IP-200PHD User Manual
Page 47
4. Monitor the Image Section
AirLive IP-200PHD User’s Manual
46
Set the time difference from Greenwich Mean Time in the area where the
device is installed.
Daylight Saving:
Disable or enable the daylight saving adjustment.
4.4.3 Maintenance
Hard Factory Default (Include the network setting):
Recall the device hard factory default settings. Note that click this button will
reset all device’s parameters to the factory settings (including the IP address).
Factory Default (Except the network setting):
The unit is restarted and most current settings are reset to factory default val-
ues. This action will not reset the network setting.
Backup Setting: