4 igmp status – AirLive Ether-GSH8TW v2 User Manual

Page 31

2.2.4 IGMP Status

Choose and click IGMP status at command. After execution, diagram will be shown like below, user can

refresh at will. There are IGMP v1, v2, v3 frames that will be shown in the network, our switch only support

IGMP V2, but it will handle some IGMP V3 frames. If this switch is Querier, it will show Querier state and Query

frames it transmitted. If it is not Querier, it only shows how many Querier frames it receives. Only one Querier

in a network section, usually Querier is in router.

AirLive Ether-GSHTW v2 / 8TW+v2 User’s Manual