AirLive Ether-GSH2404W - Manual (Page 23)

4. Web-Based Management
AirLive Ether-GSH2404W User’s Manual
20
a proper hash algorithm is used, traffic is kind of randomly decided to be transmitted
across either link within the trunk and load balancing will be seen.
„ Select the group members( Normal means the port is not the trunk port)
„ Click Apply to apply the configuration
„ Or, click Refresh to reset the configuration before applying
Aggregation interface
4.7 LACP Setting
The Link Aggregation Control Protocol (LACP) provides a standardized which means
for exchanging information between Partner Systems on a link to allow their Link
Aggregation Control instances to reach agreement on the identity of the Link
Aggregation Group to which the link belongs, move the link to that Link Aggregation
Group, and enable its transmission and reception functions in an orderly manner. Link
aggregation allow user grouping up to eight consecutive ports into a single dedicated
connection. This feature can expand bandwidth to a device on the network. LACP
operation requires full-duplex mode, more detail information refers to IEEE
802.3ad.