AirLive DM-720 User Manual
Page 45
9. Event
AirLive DM-720 User’s Manual 40
- Action
There are multiple choices for action taking which is optional for a user to select all of
them or part of them: Send Image、Send Notification、PTZ Action or Night Mode.
z
Send Image: You may set up where the image sent to, options like event server
and SD card. You must configure it first. Please refer to Event Server (Chapter
9.1).
z
Send Notification: First go to HTTP server, and than configure the HTTP server
URL, port, User ID, Password, and Proxy server settings.
Note: The setting of URL should be same as CGI.
z
PTZ Action: First configure the PTZ to set up the preset positions and tour you
desired. You may select to return to the last position after the event being
triggered.
z
Night Mode: You may set up this action being activated continually while the
event triggered or continually every period (by second) interval.
Note: Only Motion Detection excludes Night Mode.
- Schedule
You may set up the event schedule as “always” or scheduled by working day, weekend
or night mode. You must configure schedule before using it.
2. Scheduled Recording
- General
Name the recording file and make it on or off.
- Action
z
File Size: You can manually write in the file size as the suggested range.
z
Cyclic Size: You can manually write in the cyclic size as the suggested range.
- Schedule
You may set up the event schedule as “always” or scheduled by working day, weekend
or night mode. You must configure schedule before using it.