AirLive DM-720 - Manual (Page 44)

9. Event
AirLive DM-720User’Manual 39
2. SD Card
Make sure to insert the SD Card first then click “on”. Create a folder name for event
server in SD Card. There is optional selection for overwrite the previous file or not. If not,
you may set a warning when the capacity is below the following percentage: 5%, 10%,
25% and 50%.
9.2 Event List
1. Event List
- General
Name the event file and make it on or off.
- Trigger
You may activate the following trigger types as you wish depended on various
conditions:
z
Motion Detection: Click it on for using Motion Detection function as a sensor. You
must configure motion detection function before taking this as the trigger. Set
minimum time interval between 2 triggers, and choose the desired detection
area. The detection type individually stands for the following meanings:
Start: The trigger would be activated when the target object starts to move.
Stop: The trigger would be activated when the target object stops to move.
Start-Stop: The trigger would be activated during the target object starts to
move till it stops.
z
Audio Detection: Click it on for using Audio Detection function as a sensor. You
must configure audio detection function before taking this as the trigger. Set
minimum time interval between 2 triggers. The detection type stands for the
following meanings individually:
Start: The trigger would be activated when the sound is made.
Stop: The trigger would be activated when the
sound is cut off.
Start-Stop: The trigger would be activated during the sound is made and cut off.
z
Periodical: This condition can be set during the certain period (by minute) to start
the trigger.
z
On boot: The event is triggered when the IP Camera has been started over.
z
Capacity Warning: This is triggered when SD Card capacity is be below the value
you set.
z
Network Link Down: The event is triggered when the network gets disconnected.
z
IP Notification: The event is triggered when the network being restarted or the IP
being changed. There are optional network types to select, such as DHCP、
Static IP and PPPoE.