AirLive DM-720 User Manual
Page 30
6. Configuration-Basic Setup
AirLive DM-720User’Manual
25
- Obtain DNS server address automatically: Select this to obtain the address of DNS
server automatically.
- Use the following DNS server address: Select this when you set the fixed address as
the IP address of DNS server.
z
Primary DNS server: Enter the IP address of the primary DNS server.
z
Secondary DNS server: Enter the IP address of the secondary DNS server,
if necessary.
HTTP
- HTTP port number: Select 80 in general situations. If you want to use a port number
other than 80, select the text box and enter a port number between 1024 and 65535.
z
When you have set the HTTP port number to a number other than 80 on the
Network Setting screen in the Setup Program, access the device by typing the
IP address of the device on the web browser as follows:
Example: when HTTP
Note: Reboot the IP Camera after the network setting has been made.
Note: If you connect the IP Camera with your computer directly, the default
network domain of camera is 192.168.1.xx
2. PPPoE
If your ISP provides Dynamic IP with authentication by username and password, type all
PPPoE information in this part. When using the PPPoE function, you need to turn on the
DDNS or IP Notification function at the same time.