AirLive CamPro Express 64 - Manual (Page 18)

17
„ Trigger Source: Select the trigger source. If the user sets this value to
Server, CamPro Express 64 will detect the motion by itself. On the
other hand, if this value set to Camera, the detection task will be taken
by the IP camera side. Once the motion is detected, the IP camera will
send message to CamPro Express 64 for alerting the software to start
recording.
„ Live View Window: Just click on the mouse and drag the detection
area over the Live View window. The defined area will show in green
over the Live View window. You might also right click on the green gird
for cancel the very grid you selected.
„ Button: Clear the motion detection area setting if you needed to
redefine the detection area.
„ Button: Click on this button for saving the configuration.
„ Button: Use this button to cancel the configuration you made.
2.3.3 Select the button for configuring the Event
Recording.