AirLive BU-3025 - Manual (Page 10)

1. Introduction
AirLive BU-3025 Manual 4
RJ45 LAN socket: In the LAN socket, there are two LEDs embedded:
LAN LED (green color)
This LED will be flashing while network accessing via Ethernet.
Power (orange color)
This LED is used to indicate whether DC power is on or not. In addition, this LED will
be flashing while the wireless accessing of the Camera.
2. DI/DO connector:
DI/ DO: Connect to sensor in and alarm out the device
Cable for I/O connectors:
Name Cable
Color Function
GND Black GND
Sensor IN 1
Blue Digital signal input
Alarm OUT 1 Green Digital signal output
RS485 D+ Orange RS485 data +
RS485 D- Yellow RS485 data -
3. DC-in Jack:
The input power is 12VDC.
Note that supply the power to the Network Camera with the power adapter included in
package.
4. MIC in (audio in):
Connect a microphone to the network camera.
5. Line out (audio out):
Connect a loud speaker to the network camera. This function is for voice alerting and
two-way audio.
6. BNC Connector:
The composite video format will be sent out through this connector. A user might connect
the IP Camera to a monitor or DVR via this connector.