AiM LCU-One CAN for MyChron4 - Manual (Page 8)

LCU-ONE CAN connected to MyChron4
User Manual
Release 1.04
3
Chapter 4 – Configuration on MyChron4
The only configuration needed to better use MyChron4 is choosing the temperature
channel shown together with LAMBDA value.
Press Menu button selecting Configuration icon:
Afterwards select temperatures setup icon:
This window appears:
Using left buttons (“UP”/”DOWN”) select “Temp with Lambda” row.
Pressing “ENTER” the desired input is set.
Available options are:
• M4 T1: MyChron4 Temperature;
• M4 T2: MyChron4 2 nd
Temperature (only 2T version);
• eBoxT1: eBox 1 st
Temperature (assuming this peripheral is connected);
• eBoxT2: eBox 2 nd
Temperature (assuming this peripheral is connected);
www.aim-sportline.com 7