AiM LCU-One CAN for MyChron4 - Manual (Page 7)

LCU-ONE CAN connected to MyChron4
User Manual
Release 1.04
2
Chapter 3 – Connection with MyChron4
+ ─
Connecting Lambda controller to MyChron4, the system automatically switches on and
recognises the peripheral at start up.
Warning: connect LCU-ONE CAN to MyChron4 OFF.
In the figure above, LCU-ONE CAN controller is connected to MyChron4 through Data
Hub, the CAN connections multiplier.
In case the only available peripheral is LCU-ONE CAN, it can be connected directly to
MyChron4 through the back connector labelled as EXP/PC.
Though the system is powered through Lambda controller connected to the battery, it is
suggested to leave in MyChron 4 and in the possible eBox the related internal
batteries.
Lambda controller switches automatically off when MyChron4 is switched off.
www.aim-sportline.com 6