7 standards, 8 models, 9 scope of delivery – ADS-TEC OPC5112 User Manual

Page 7: Industrial pcs opc5112

Industrial PCs OPC5112

1.7

TANDARDS

The device meets the requirements and objectives of the following EC directives:

•

The device complies with the test specifications for the CE label according to the
European test standards EN 55022 and EN 50082-2.

•

The device complies with the test specifications DIN EN 60950 (VDE 0805, IEC
950) "Safety of Information Technology Equipment".

•

The device complies with the DIN EN 60068-2-6 (sinusoidal vibration) test
specifications.

•

The device complies with the DIN EN 60068-2-29 (bump) test specifications.

Note:
The manufacturer keeps a corresponding declaration of conformity for the responsible

authorities and can present that document upon request.
In order for the device to comply with the legal requirements pertaining to

electromagnetic compatibility, all connected components and cable connections have to

meet these requirements as well. Therefore shielded bus and LAN cables with shielded

plugs should be used and installed as specified in this manual.

1.8

ODELS

Two models of the system are provided:

Platform with CompactFlash:

This platform has no rotating mass storage media (e.g. hard drives) and incorporates an
embedded operating system (Windows CE.net / XP embedded) for stationary use.

Platform with hard drive:

This model includes a hard drive for stationary use in production environments and

incorporates standard operating systems.

1.9

COPE OF DELIVERY

Shipment includes the following:

•

1 device

•

For 230 V AC device: power cable with IEC connector

•

For 24 V DC device:

3 pin Phoenix Contact COMBICON MC 2,5/3-GF-5,08 feed-

through header (already mounted in the device socket)

•

Mounting kit for installation

•

Service CD

Optional components

•

Operating system