5 startup, 1 available interfaces – ADS-TEC OPC5112 User Manual

Page 13

Text mode
Original mode

Industrial PCs OPC5112

TARTUP

Warning:
The PC should be switched off before disconnecting plugs in order to avoid damage to

electronic components!
In order to avoid formation of condensation, the device should only be switched on once

it has acclimated to the room temperature.
Pay attention to the voltage permitted for the device.
You should allow five seconds to pass between switching the device off and switching it

back on.Do not remove the cover with force.

5.1

VAILABLE INTERFACES

The devices have the following interfaces as standard.

Note:
Cable shielding of a data cable has to be connected to the plug connection casing (EMC).
The interfaces have to be enabled in the embedded operating system and the matching

drivers have to be installed to be able to use the interfaces.