9 software/driver installation, 1 installing the operating system – ADS-TEC OPC5112 User Manual

Page 24

Industrial PCs OPC5112

OFTWARE

DRIVER INSTALLATION

The device is provided with a preinstalled Windows operating system if requested by the
customer. The drivers required for this are configured and the operating system is

activated by entering the licensing information. If you have to reinstall the operating
system, please proceed as follows. More recent operating systems such as Windows XP

recognize the network and graphics cards upon initial installation and therefore you only
have to install the drivers for the touch screen and the software keyboard.

Note:
If the hard drive has been formatted, then the operating system can be installed again

using the provided interfaces.
An external keyboard is required for installation.

9.1

NSTALLING THE OPERATING SYSTEM

If the device has no integrated drive, then the operating system can only be installed using

the USB interface.

Installation procedure:

USB:

In order to be able to boot the system from the USB interface, you have to

set the boot drive to USB in the BIOS.

Restart the device and insert a Windows CD.

Installing Windows and configuring the basic data.

The touch screen driver and the software keyboard should be installed for
devices with touch screen.

You can use a USB stick containing an image file to perform a complete install of Windows
CE.net or Windows XP Embedded. You can obtain the required image from ads-tec or the

ASSIX online portal.