12 installation of the tt13 software package, 13 wlan, Tablet pcs itc1013 – ADS-TEC ITC1013 User Manual

Page 32

Tablet PCs ITC1013

6.12

NSTALLATION OF THE

TT13

OFTWARE

ACKAGE

Note:
With the TT13 Software Tools hardware components can be controlled, monitored and

evaluated. In case of high exposure the Software Tools will help to prevent lasting

damage by protecting important hardware components actively. In diagnostic cases the

Software Tools will give information about the system condition and enable fast

troubleshooting.

Once the installation is completed, you can finish the setup by clicking on Finish.
If the recommended directory path for installation is used, the ads-tec tools are located
at:

Start  Programmes  ITC1013 Tools

6.13

WLAN

The device is equipped with a wireless network card. If the operating system supports this

card via drivers, the device can be integrated into a Ethernet Network with Support for 11
Mbit or 54Mbit (802.11 a/b/g). The specifications of this network topology has to be

attended.

Note:
The check and settings for country code of the WLAN-Card is the users responsibility. The

default settings in a german image is Germany and in a English image it is United States.

Note:
In default condition Windows is used to manage the wireless connection. If the Atheros

Client Utility should be used, you have to remove the checkbox from ”Use Windows to

configure Settings” in the path: Start  Settings  Control Panel  Network

Connections. With the right mouse button you have to choose Wireless Netowrk

Connection and navigate to the Properties section. Switch to the tab Wireless

Networks