ADS-TEC TT13 User Manual User Manual

Page 19

Text mode
Original mode

Tablet PCs TT13

ATTERY STATUS REPLACEMENT

The TT13 batteries can be removed by using a mechanical ejector on the back of the

device.

The batteries status can be retrieved by pushing a button on the batteries. The batteries

display will light up for a few seconds and show the current batteries charge status on a

scale from 0 to 100. If the display lights red, this represents a weak battery. If the display

is green, it shows that the battery is fully charged. If the device is in operating mode, the
battery status can be retrieved by using the supplied Battery Information & Diagnostics

Tool.

Note:
The "Hardware specific software” chapter describes the Battery Information &

Diagnostics Tool, which can be used for retrieving the accumulator status while operating

the unit.