Replacing the lithium battery, 5 replacing the lithium battery, Warning – ADS-TEC OPC8013/8015/8022 User Manual

Page 47

Text mode
Original mode

OPC8013/OPC8015/OPC8022

11.5 Replacing the lithium battery

Loosening / removing the retaining bracket

This battery is secured by a plugged-in retaining bracket. The retaining bracket can be removed from
the battery holder by carefully lifting the external tabs with a flat tool (screwdriver).

Installing / replacing the battery

The lithium battery can now be removed. It may only be replaced with a battery of the same type. The
type of battery to be used is:

Lithium battery 1/2AA 3V (e.g., ads-tec part number: DZ-SONS-04100-0)

Ensure the correct polarity when inserting the battery

WARNING

There is a risk of explosion if the battery is
replaced with the wrong type or with the wrong
polarity. Observe the regulations for
environmentally sound disposal of used batteries.