3 touch screen 5.4 status displays, 3 touch screen, 4 status displays – ADS-TEC OPC8013/8015/8022 User Manual

Page 27

OPC8013/OPC8015/OPC8022

5.3 Touch screen

The control system is equipped with a touch screen monitor. The touch screen is internally connected
via the USB interface. The driver software necessary for use is already integrated in the respective
operating system.

Pos : 23 /D atent ec hni k/Bedienung/ St atus-Anzeig en/ SYS- LED/ SYS- LED für VMT 60xx- Serie @ 2\ mod_1260525540269_6.doc @ 6876 @

5.4 Status displays

SYS LED

Depending on the type of flashing different device states are displayed by the SYS LED.

The following signals are displayed:



LED green Device is ready for operation (POWER ON)



LED off

Device is switched off (POWER OFF)

Pos : 25 /D atent ec hni k/Schnitts tell en/Sc hnitts tell eneinst ellung/Sc hni ttst elleneins tell ung für VMT-Serie / PLC 500 @ 0\ mod_1158916296612_6. doc @ 517 @