Buffalo Technology Buffalo AirStation WLI-PCI-G54 - Manual (Page 4)

4
Step ẅ Configuring Wireless Zero
Configuration Service
Ạ Right click the networking icon in
the taskbar and select View Available
Wireless Networks to display a list
of available wireless networks. Select
an access point network name or SSID
and click the Connect button to
establish a connection.
ạ Select a network name or access
point and click the Advanced button
to enter an SSID and/or
WEP/WPA/WPA-PSK encryption
key into the appropriate field, if
any is necessary and click the
Connect button.
If no Wireless Networks Tab is available,
see step 2C.
NOTE: If configuration is successful,
skip step 2C.
WPA requirements
Windows XP users must use the Wireless Zero Configuration Service with
Service Pack 1 (SP1) and the WPA patch installed. This software can be
downloaded from http://www.microsoft.com.
WIndows 98SE/2000/ME users require a third-party WPA supplicant such as
Odyssey by Funk Software. For more information visit: http://www.funk.com
For more information about the Wireless Zero Configuration Service, refer to the
Microsoft Support Web Site: http://www.microsoft.com
NOTE: Buffalo Technology recommends that users of the Wireless Zero
Configuration Service upgrade to the latest version available free at
www.microsoft.com.