Buffalo Technology Buffalo AirStation WLI-PCI-G54 - Manual (Page 2)

Step Ẅ Installing the 54Mbps
Wireless Desktop PCI Adapter-g.
Ạ With the computer powered
down and the cover removed to
expose the inside of the system,
insert the 54Mbps Desktop PCI
Adapter into an available PCI slot.
The card should fit firmly into the
slot and should be screwed into the
chassis.
Note: Care should be taken not to
unplug any cables or unseat any
other cards installed in the com-
puter during installation of the
Desktop PCI Adapter.
Replace the cover of the computer.
ạ Plug the antenna cable into the
Desktop PCI Adapter. For optimal
performance, locate the antenna
away from the computer to ensure
good signal reception.
Once the cover has been replaced
and the antenna is installed, the
computer can be powered on.
Upon loading Windows and logging
on if necessary, the Found New
Hardware Wizard will launch
automatically.
Insert the AirNavigator CD.
Click the Next button to continue
to the Select Network Adapter
page.
Windows XP
Installation & Configuration
2
NOTE: If AutoRun is enabled, exit out of the automatic Software Installation.