Gear housing, Drive shaft, Tine replacement – Echo 99944200563 User Manual

Page 18

X77702093505

MAINTENANCE

99944200563

Gear Housing

1. Clean all loose debris from gear box.

2. Remove plug (A) and check level of grease.

3. Add grease if necessary, DO NOT over-fill.

4. Install screw plug (A).

Drive Shaft

1. Remove gear housing locator screw (A).

2. Loosen gear housing mounting bolt (B).

3. Pull gear box from drive shaft housing.

4. Pull flexible cable from the drive shaft housing, wipe clean

and re-coat with a thin coating [15 ml (1/2 oz.)] of grease.

5. Slide the flexible cable back in the drive housing. DO NOT

get dirt on the flex cable.

6. Position lower drive shaft (end without safety decal) into

gear housing shaft mount.

7. Align hole in drive shaft housing with gear housing shaft

hole (C), and seat lower drive shaft end into gear housing
shaft mount. Install and tighten locator screw (A).

8. Tighten gear housing mounting bolt (B).

Tine Replacement

Level 2.

Bent or broken tines should be replaced before operation for best dethatching efficiency.

Parts
Required:

Thatching spring (P/N 61004725560),
Screw (P/N 88995325560), plastic tube
(P/N 21001325560)