Echo 72928 Owners Manual v.4 - Manual (Page 6)

3
S E C T I O N 1
Failure to maintain proper fastening torque (75 ft.
lbs.) on bolts for the components listed above may
result in severe damage to the chipper and/or
personal injury.
5. Do not allow processed material to build up in the
discharge area; this may prevent proper discharge
and can result in kickback of material through the
feed opening.
6. Do not attempt to operate the chipper with any of
the guards, deflectors, or shrouds removed. Keep
away from moving parts.
7. Keep all guards, deflectors, and shrouds in good
working condition.
8. Always stand clear of the discharge area when
operating this machine.
9. Keep your face and body back from the feed opening.
10. Do not overreach. Keep proper balance and footing
at all times.
11. Do not transport or move machine while the ma-
chine is running.
12. If the machine becomes clogged, shut off engine.
Allow machine to come to a complete stop before
clearing debris.
Additional Safety Rules for Towing
1. Before towing, rotate the discharge tube to face in
the opposite direction of the vehicle that is towing it.
The Standard muffler installed on the
chipper engine does not include a spark
arrestor. If this machine is to be used in an
area where a spark arrestor is required by
law, one will have to be added before use.
Contact the local authorities to see if these
laws apply to you. See your authorized engine
dealer for spark arrestor options.
This will prevent the discharge tube from projecting
over the trailer wheels and striking foreign objects.
2. Always connect hitch safety chains. Make sure
trailer hitch bolts are tight and secure. Do not
attempt to attach the pintle hitch to a ball type
vehicle hitch.
3. Maximum towing speed should not exceed 55
M.P.H. Inflate tires to manufactures specs. as
stated on the tire sidewall. Check wheel lug bolts
periodically to be sure they are tight and secure.
4. Make sure that the jack stand on trailer is in the UP
position to clear the ground during towing. Place the
jack stand on a level surface and secure it in the
DOWN position before use.
5. Never allow passengers to ride on the infeed chute
while the vehicle is moving, whether the chipper is
running or not.
Maintenance and Storage
1. When this equipment is stopped for servicing,
inspection, storage, or to change an accessory, make
sure that the key is removed from key switch.
Disconnect battery.
2. Store the machine out of the reach of children and
where fuel vapors will not reach an open flame or
spark. For storage periods of three months or more,
drain the fuel and dispose of it in a safe manner.
Always allow the machine to cool before storing.