beautypg.com

Electrical installation: pto models – Echo 72928 Owners Manual v.4 User Manual

Page 18

background image

15

Electrical Installation: PTO Models

1. Attach the chipper to the tractor. Connect the Red posi-

tive lead to a +12 Volt DC power source on the tractor.

2. Crimp a ring terminal onto the Black, Ground lead.

3. Drill a 3/16" hole in the PTO stand, close to the solenoid

valve, and and secure the ground wire with the #10
self-tapping screw provided.

4. Connect the two-pin connector to the top of the valve

coil.

5. Connect the socket connector to the LOFA control.

6. Secure wiring harness with cable ties as appropriate.

1. Crimp a ring terminal onto the Black, Ground lead.

2. Drill a 3/16" hole in the trailer, close to the solenoid

valve, and and secure the ground wire with the #10
self-tapping screw provided.

3. Connect the two-pin connector to the top of the valve

coil.

4. Crimp a spade connector onto the Red wire in the Feed

Sensor harness and connect to the Yellow wire from
the Kohler engine harness .

5. Connect the socket connector to the LOFA control.

6. Secure wiring harness with cable ties as appropriate.

Electrical Installation: Models 620 & 825

1. Crimp a ring terminal onto the Black, Ground lead.

2. Drill a 3/16" hole in the trailer, close to the solenoid

valve, and and secure the ground wire with the #10
self-tapping screw provided.

3. Connect the two-pin connector to the top of the valve

coil.

4. Crimp a ring terminal to the Red wire in the Feed Sen-

sor harness and attach to "B" terminal on the back of
the Murphy Switch.

5. Connect the socket connector to the LOFA control.

6. Secure wiring harness with cable ties as appropriate.

Electrical Installation: Models 928, 942, 950

PN

Description

Qty.

12813

Harness, Auto Feed

1

15602

Washer, #6 SAE Flat

4

15640

Nut, M4-0.7 ZP Hex

8

12674

LOFA Hydraulic Control

1

73242-12

Bracket, Proximity Sensor

1

12828

Connector, #10 Insulated Ring

2

12829

Connector, #10 Insulated Fork

3

Electronic Feed Parts List (PN 73244)

PN

Description

Qty.

12830

Connector, .25 Insulated Male

2

17320

Nyl Cable Tie

4

16967

Valve, Solenoid Cartridge

1

16968

Coil, Solenoid Valve

1

15282

Bolt, 5/16x1-1/2 GR5 Hex

1

15225

Screw, #10x3/4 Hex Tap

1

This manual is related to the following products: