Echo 7812086 Owners Manual v.3 - Manual (Page 24)

12 INCH CHIPPER 20
SERVICE & MAINTENANCE
BEFORE INSpECTINg OR SERvICINg ANY pART OF ThIS MAChINE, ShuT OFF pOwER SOuRCE, REMOvE kEY,
DISCONNECT ThE BATTERY CABLES AND MAkE SuRE ALL MOvINg pARTS hAvE COME TO A COMpLETE STOp.
WarninG
Before starting the machine, check the coolant level in the
radiator and coolant reserve tank (if equipped) to ensure it
is with in the proper operating range (between FuLL and
FILL). Refer to the engine owner's manual for specific
instructions on checking and adding coolant.
Coolant is hot during and after operating chipper. Do
not check coolant level when fluid is hot. wait until the
fluid has cooled before removing radiator cap.
Caution
5.13..CheCk/fill.Coolant
hydraulic fluid drives the feed roller. The hydraulic tank is
located underneath the rotor housing. Check the fluid level
before each use and add if necessary.
The hydraulic pump requires premium hydraulic fluids
containing high quality rust, oxidation, and foam inhibitors.
These include:
premium turbine oils,
ApI CD engine oils per SAE J183,
M2C33F or g automatic transmission fluids meeting
Allison C-3 or Caterpillar TO-2,
and certain specialty agricultural tractor fluids.
5.12..CheCk.hyDrauliC.fluiD
Hydraulic fluid tank
Coolant tank