Echo 7812086 Owners Manual v.3 - Manual (Page 10)

12 INCH CHIPPER 6
Section
If any bolts or nuts are dropped in the machine, be sure
to remove them before starting the machine.
assembly
hydraulic fluid drives the feed roller. The machine was
shipped with fluid, since it was tested at the factory. however,
check the fluid levels before initial operation and add if
necessary. To check the level, locate the hydraulic fluid tank,
which is next to the knife access cover (see below).
The hydraulic pump requires premium hydraulic fluids
containing high quality rust, oxidation, and foam inhibitors.
These include:
premium turbine oils,
ApI CD engine oils per SAE J183,
M2C33F or g automatic transmission fluids meeting
Allison C-3 or Caterpillar TO-2,
and certain specialty agricultural tractor fluids.
Check the oil level and, if needed, fill the engine crankcase
with the type and amount of oil specified in the engine
owners manual. There are two oil filler caps (see below).
Either can be used to add oil.
2
2.1.CheCk/aDD.hyDrauliC.fluiD 2.2..CheCk/aDD.motor.oil.
DanGer
The hydraulic fluid level should be checked before each use
Oil Filler
Cap
Oil Level
Dipstick
Oil Filler Cap
Other oil filler cap and dipstick