Echo CH45540 Owners Manual v.5 - Manual (Page 7)

4.5 INCH CHIPPER
3
ENGLISH
SAFETY
1.9 SAFETY DECALS
CHECK BLADE BOLTS
FOR PROPER TORQUE
AFTER EVERY 8 HOURS OF
OPERATION. CHECK BLADES
AND ROTATE OR RESHARPEN
DAILY OR AS REQUIRED TO
KEEP BLADES SHARP. REFER
TO OWNERS MANUAL FOR INSTRUCTIONS. FAILURE TO DO SO
MAY CAUSE POOR PERFORMANCE, DAMAGE OR PERSONAL
INJURY AND WILL VOID THE MACHINE WARRANTY.
PN 14942-00
8
3
READ AND UNDERSTAND THIS
OWNER/OPERATORS MANUAL. BE
COMPLETELY FAMILIAR WITH THE
CONTROLS AND THE PROPER USE
OF THIS EQUIPMENT
OBTAIN AND WEAR SAFETY GLASSES
AND USE HEARING PROTECTION AT
ALL TIMES WHEN OPERATING THIS
MACHINE.
BEFORE INSPECTING OR SERVICING
ANY PART OF THIS MACHINE, SHUT
OFF POWER SOURCE, DISCONNECT
SPARK PLUG WIRE FROM SPARK
PLUG AND MAKE SURE ALL MOVING
PARTS HAVE COME TO A COMPLETE
STOP.
P/N 12172
KEEP HANDS AND FEET OUT
OF INLET AND DISCHARGE
OPENINGS WHILE MACHINE
IS OPERATING TO AVOID
SERIOUS PERSONAL INJURY.
STOP AND ALLOW MACHINE
TO COME TO A COMPLETE
STOP BEFORE CLEARING
OBSTRUCTIONS.
P/N 12175
6
P/N 12250 7
PN 12168
1
CONTACT WITH ROTATING
DRIVELINE CAN CAUSE
DEATH. DO NOT OPERATE
WITHOUT ALL DRIVELINE,
TRACTOR AND EQUIPMENT
SHIELDS IN PLACE. ENSURE
THE DRIVELINE IS SECURELY
ATTACHED AT BOTH ENDS
AND DRIVELINE SHIELDS
THAT TURN FREELY ON THE DRIVELINE ARE IN PLACE.
PN 12174
DO NOT OPERATE MACHINE WITHOUT
SHIELDS IN PLACE. FAILURE TO DO
SO MAY CAUSE SERIOUS INJURY OR
DEATH.
PN 12174
5
2 PN 12169
KEEP HANDS AND FEET OUT OF INLET AND
DISCHARGE OPENINGS WHILE MACHINE IS
OPERATING TO AVOID SERIOUS PERSONAL
INJURY. STOP AND ALLOW MACHINE TO COME
TO A COMPLETE STOP BEFORE CLEARING
OBSTRUCTIONS.
4 PN 12173
DO NOT OPERATE THIS
EQUIPMENT IN THE VICINITY
OF BYSTANDERS. DO NOT
ALLOW CHILDREN TO OPERATE
THIS EQUIPMENT. ALWAYS
STAND CLEAR OF DISCHARGE
AREA WHEN OPERATING THIS
MACHINE. KEEP FACE AND BODY
AWAY FROM DISCHARGE AREAS.
1.6 SAFETY DECALS
PN 12169
PN 14942-00
PN 12168
PN 12173
PN 12174
PN 12175
PN 12250
PN 12172
See Section 1.7 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety
instructions and decals. Make certain that all safety and operational decals on this machine are kept clean and in good
condition. Decals that need replacement must be applied to their original locations.
READ AND UNDERSTAND YOUR OWNERS MANUAL
BEFORE OPERATING. IF OWNERS MANUAL WAS NOT
INCLUDED OR YOU HAVE ANY QUESTIONS, PLEASE CALL
800.247.7335 OR 701.282.5520 (U.S.A.)