Echo CH8670H Owners Manual v.5 - Manual (Page 8)

4 8 INCH TURNTABLE CHIPPER
SAFETY
1.9 SaFETY dEcaLS
kEEP HANDS AND FEET OuT
OF INlET AND DISCHARgE
OPENINgS WHIlE MACHINE
IS OPERATINg TO AVOID
S E R I O u S P E R S O N A l
INJuRy. STOP AND AllOW MACHINE TO COME TO A
COMPlETE STOP BEFORE ClEARINg OBSTRuCTIONS.
pN 12175
5
3
pN 12173
DO NOT OPERATE THIS
EQuIPMENT IN THE VICINITy
O F B y S TA N D E R S . D O
NOT AllOW CHIlDREN TO
OPERATE THIS EQuIPMENT.
AlWAyS STAND ClEAR OF
DISCHARgE AREA WHEN OPERATINg THIS MACHINE. kEEP
FACE AND BODy AWAy FROM DISCHARgE AREAS.
pN 14942-00 7
1 pN 12169
kEEP HANDS AND FEET OuT OF INlET AND
DISCHARgE OPENINgS WHIlE MACHINE
IS OPERATINg TO AVOID SERIOuS
PERSONAl INJuRy. STOP AND AllOW
MACHINE TO COME TO A COMPlETE STOP
BEFORE ClEARINg OBSTRuCTIONS.
2
READ AND uNDERSTAND
THIS OWNER/OPERATORS
MANuAl. BE COMPlETEly
F A M I l I A R W I T H T H E
CONTROlS AND THE PROPER
uSE OF THIS EQuIPMENT
OBTAIN AND WEAR SAFETy
glASSES AND uSE HEARINg
PROTECTION AT All TIMES
WHEN OPERATINg THIS
MACHINE.
BEFORE INSPECTINg OR
SERVICINg ANy PART OF THIS
MACHINE, SHuT OFF POWER
SOuRCE, DISCONNECT
SPARk Plug WIRE FROM SPARk Plug AND MAkE SuRE
All MOVINg PARTS HAVE COME TO A COMPlETE STOP.
pN 12172
pN 12174
DO NOT OPERATE MACHINE WITHOuT
SHIElDS IN PlACE. FAIluRE TO DO
SO MAy CAuSE SERIOuS INJuRy OR
DEATH.
PN 12174
4
CHECk BlADE BOlTS FOR
PROPER TORQuE AFTER
E V E R y 8 H O u R S O F
OPERATION. CHECk BlADES
AND ROTATE OR RESHARPEN
DAIly OR AS REQuIRED TO kEEP BlADES SHARP. REFER
TO OWNERS MANuAl FOR INSTRuCTIONS. FAIluRE
TO DO SO MAy CAuSE POOR PERFORMANCE, DAMAgE
OR PERSONAl INJuRy AND WIll VOID THE MACHINE
WarrantY.
pN 12250 6
DO NOT OPERATE CHIPPER
WITHOuT TuRNTABlE
BASE lOCkED IN PlACE.
FAIluRE TO DO SO MAy
RESulT IN DAMAgE TO
MACHINE AND/OR SERIOuS
BODIly INJuRy.
FOR TRANSPORT, RETuRN
CHIPPER TO TRANSPORT POSITION, INSERT TRANSPORT
SAFETy PIN AND ClIP, AND SET TuRNTABlE BRAkE
HANDlE TO lOCkED POSITION. FAIluRE TO DO SO MAy
RESulT IN DAMAgE TO MACHINE AND/OR SERIOuS BODIly
INJuRy.
pN 18606-00
8
18
60
6-
00
See Section 1.10 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety
instructions and decals. Make certain that all safety and operational decals on this machine are kept clean and in good
condition. decals that need replacement must be applied to their original locations.