beautypg.com

Service & maintenance, 1 maintenance schedule, Warning – Echo CH911DH Owners Manual v.6 User Manual

Page 17: English, Service and maintenance schedule, Frequency

background image

9 INCH CHIPPER

13

ENGLISH

Section

SERvICE & maINTENaNCE

5

WaRNING

To prevent personal injury or property damage, shut

off engine and make sure all moving parts have

come to a complete stop before servicing, adjusting

or repairing.

5.1 maINTENaNCE SCHEDuLE

The items listed in this service and maintenance schedule

are to be checked, and if necessary, corrective action

taken. This schedule is designed for units operating under

normal conditions. If the unit is operating in adverse or

severe conditions, it may be necessary for the items to be

checked and serviced more frequently.
SEE ENGINE oWNER’S maNuaL FoR FuRTHER

ENGINE maINTENaNCE aND TRoubLESHooTING

INFoRmaTIoN.

SERvICE aND maINTENaNCE SCHEDuLE

FREQuENCY

CompoNENT

maINTENaNCE

REQuIRED

REFER To

ENGINE

opERaToR’S

maNuaL

bEFoRE

EaCH

uSE

EvERY

8

HouRS

EvERY

25

HouRS

EvERY

50

HouRS

EvERY

200

HouRS

EvERY

YEaR

AIR CLEANER

CHECK AND ClEAN (1)

AIR INTAKE

ClEAN (1)

ENgINE OIl

CHANgE (1)

FUEL FILTER

REPLACE

SPARK Plug

CHECK CONDITION AND gAP

HyDRAulIC OIl

CHECK/FIll

ENgINE OIl

CHECK/FIll

FUEL TANK

CHECK/FIll

ALL INTERNAL AND

EXTERNAl NuTS AND

BOLTS

CHECK TIgHTNESS

TIRE PRESSURE

CHECK

BATTERY CONNECTIONS

CHECK

CHIPPER ANVIl

CHECK ClEARANCE AND RE-

TORQuE TO 75 FT-lBS. (2)

CHIPPER BlADES

CHECK SHARPNESS AND RE-

TORQuE TO 120 FT-lBS. (2)

ENTIRE MACHINE

CLEAN

DRIVE BELT

CHECK

HyDRAulIC DRIVE BElT

CHECK

BELT TENSION

CHECK

BElT/PullEy AlIgNMENT

CHECK

gREASE ZERKS

LUBE

HyDRAulIC OIl FIlTER

REPLACE

WHEEl BEARINgS

CHECK AND REPACK

(1) PERFORM MORE FREQuENTly uNDER EXTREMEly DuSTy CONDITIONS.
(2) PERFORM MORE FREQuENTly WHEN CHIPPINg DRy OR DIRTy WOOD.
as the Limited Warranty states, failure by the owner to perform normal maintenance will void the machine’s warranty. The aggressive,

high-speed nature of chipping REQuIRES THE oWNER To pERFoRm THE abovE LISTED NoRmaL maINTENaNCE. Special consideration

to maintain and re-torque the CHIppER aNvIL, CHIppER bLaDES, aND aLL INTERNaL aND EXTERNaL NuTS aND boLTS is the sole

responsibility of the owner. Failure by the owner to do so shall be cause for denial of warranty.

This manual is related to the following products: