IOGear GWHD11 - Manual (Page 7)

6
The Power LED on the
receiver will flash ORANGE
when it is in Pairing Mode.
To exit Searching Mode, press
the Transmitter No. button on
the remote control.
4. When both the transmitter and
receiver are in Pairing Mode,
they will search for each
other and automatically pair.
5. After the pairing is complete, both the transmitter and receiver
will re-boot and establish the link to each other automatically
within 5 seconds.
1. If the transmitter and receiver lose their linked connection,
follow the steps for Pairing Additional Transmitter to
re-establish the connection.
Repairing Transmitter to Receiver
Adding GWHD11...