IOGear GUWAVKIT4B User Manual
Page 10
10
4. Connecting Audio Devices
1.
The Wireless USB Device Adapter provides one 3.5mm port, as
shown in the illustration on the last page.
5. Set-Up Complete
1.
The default configuration for the external monitor connected to the Receiver Base is in
the Extend mode (an extension of the image on the computer to a second screen).
2.
When the PC’s image is displayed on the display / monitor, the Wireless Connection
LED Light bar on the front panel will glow blue. The Power / Signal light will either glow
green (good signal), orange (fair signal) or red (weak signal) depending how far away
the PC / PC Adapter is from the Receiver Base. For best video image results, please
position the PC / PC Adapter close enough to the Receiver Base so that the Power /
Signal Indicator Light shows green.
Note: HD and 3.5mm options may be operated simultaneously
6. Connecting USB Devices* (Optional)
1.
The Receiver Base provides one USB 2.0 port.
2.
Connection can be made to an External HDD’s, wireless
keyboard etc.
*Webcam’s are not supported.
Note: IOGEAR Wireless A / V Multimedia Keyboards with Trackball make a perfect
companion: GKM561R, GKM681R, GKM581R and GKM571R.