IOGear GE1337P Manual - Manual (Page 25)

Chapter 3: Basic Operation
17
Switch Profile
Profile Selection Hotkeys are assigned to profiles when they are created with
the KeyMander software (see Creating Profiles, page 26). You can switch
Profiles during gameplay using the Profile Selection Hotkeys [F1] ~ [F8].
The Profile Selection Hotkey is found under each profile, as shown here:
To switch profiles, press the Profile Selection Hotkey assigned to the profile. A
single beep will alert you that the profile has changed. [F1]: Default
PS3Controller Profile. [F2]: Default Xbox Controller Profile.
Keyboard / Controller Mode
Use [F9] to switch between Keyboard Mode and Controller Mode.
Keyboard Mode allows you to use the keyboard to type during gameplay - for
chatting or typing information that requires text.
Controller Mode is for normal gameplay with the keyboard.
Pressing [F9] switches modes:
Single Beep - Controller Mode ON
Double Beep - Keyboard Mode ON
Turbo Mode
Use [F10] to turn Turbo Mode on or off.
Turbo Mode on: All controller buttons set with Turbo will work (see Turbo,
page 41), and the orange Turbo LED lights up.
Pressing [F10] switches:
Single Beep - Turbo Mode ON
Double Beep - Turbo Mode OFF