IOGear GE1337P Quick Start - Manual (Page 4)

Gamepad Mouse Keyboard
Power PC Game
Reset
2 1 3
L R
SELECT START
4
3
Hardware Setup
1. Connect your console controller to the Gamepad Port.
2. Connect your USB Keyboard to the Keyboard Port.
*
3. Connect your USB Mouse to the Mouse Port.
4. Using the included USB cable, connect the mini USB B plug to the
Game Port on the back of KeyMander, then connect the USB A plug to
controller port #1 on the front of the console.
5. Power on the console and your KeyMander is ready to use.
6. Enter Keyboard Mode
by pressing F9.
* When using a wireless keyboard & mouse set, plug the receiver into the Keyboard
Port. Some wireless keyboard & mouse sets may not be supported.
Note: KeyMander is compatible with some, but not all PC gaming devices such as
keyboards, keypads and mice. When using a compatible PC configurable device,
be sure to setup/program your device on the PC before connecting it to
KeyMander. You may need to try different device settings and/or Keymander
settings to achieve best performance.