IOGear GE1337P Quick Start - Manual (Page 11)

Note: Changes made to Direct Mapping Mode are not permanently saved
to a profile.
Note: Changes made in In-Game Mouse Sensivity Mode are not
permanently saved to a profile.
In-Game Mouse Sensitivity Adjustment
10
Direct Button Mapping Mode
Direct Button Mapping allows you to change keyboard or mouse maps
without connecting KeyMander to your PC. Direct Button Mapping requires
connection of your PS3/Xbox controller to the KeyMander for basic setup.
To use Direct Mapping:
1. Connect your controller using your USB cable to the Gamepad port on
the KeyMander.
2. Press Select + Start (PS3), Back + Start (Xbox) or View + Menu (Xbox
One) buttons at the same time. You will hear 1 beep from KeyMander
and the Setting LED will flash slowly.
3. Press PS, Xbox Guide, or Xbox button. KeyMander will beep once
again and Setting LED will now flash rapidly. You are now in Direct
Mapping Mode.
a. Press the desired PS3/Xbox controller button you wish to map.
KeyMander will beep once to confirm.
b. Press any key on the keyboard or mouse and the controller button
will be mapped to that key. KeyMander will beep once to confirm.
c. Continue steps 3a & 3b until all desired buttons have been mapped
to keyboard or mouse.
4. Press Select + Start (PS3), Back + Start (Xbox) or View + Menu (Xbox
One) buttons at the same time to exit Direct Mapping Mode.
KeyMander will beep twice and the Setting LED will stop flashing.
The KeyMander has the ability to have both Aim/Look and Aim Down Sight
(ADS) Sensitivity adjusted without having to use the KeyMander software
through the In-Game Mouse Sensitivity Mode feature.
To enter into In-Game Mouse Sensitivity Mode:
1. Press
Select + Start (PS3), Back + Start (Xbox) or View + Menu (Xbox
One) buttons at the same time. You will hear 1 beep from KeyMander
and the Setting LED will flash.
2. You are now in Mouse Sensitivity Mode.
3. To adjust Aim/Look sensitivity, Press
UP or DOWN on the D-Pad. Each
press corresponds to 1 level of sensitivity.
4. To adjust ADS sensitivity, Press LEFT (to decrease) or RIGHT (to
increase) on the D-Pad.
5. Once the desired level of sensitivity has been reached, Press Select +
Start (PS3), Back + Start (Xbox) or View + Menu (Xbox One) buttons to
exit out of Mouse Sensitivity Mode. The KeyMander will beep twice and
the Setting LED will stop flashing.