IOGear GE1337P Quick Start - Manual (Page 13)

Firmware Upgrade
12
Upgrading KeyMander Firmware
To upgrade the firmware on your KeyMander, follow the steps below:
1. Go to www.IOGEAR.com/software/GE1337P/
2. Select the latest firmware link and download to your PC.
3. Once finished, unzip the file and remember the saved location.
4. Connect your KeyMander to your PC:
a. Plug one of the included mini USB B cables to the PC Port located
on the back of the KeyMander.
b. Plug the other included mini USB B cable to the Power Port
located on the back of the KeyMander.
c. Connect both USB cables to your PC
5. Launch the KeyMander software and click “Connect”.
6. On the “Groups & Profiles” page, click “Menu” then “Upgrade
Firmware”.
7. Locate the unzipped “firmware.exe” file and click “Open”.
8. The KeyMander software will close and the KeyMander firmware
upgrade utility will launch automatically.
9. Click “Next” to begin the upgrade process. When the firmware
upgrade is complete, click “Finish” and the utility will close.
This Quick Start Guide is intended to cover
basic setup and key functions to get you up
and running quickly.
For a complete explanation of advanced
setup and additional features, please
download the KeyMander User Manual from
www.IOGEAR.com/Product/GE1337P