IOGear GCS1804 User Manual
Page 34
34
35
HOTKEY
Selects which key sequence initiates Hotkey operations :
[Scroll Lock] [Scroll Lock] (Default) or [Ctrl] [Ctrl] (Alternate).
OSD HOTKEY
Selects which key sequence initiates the OSD
[Num Lock] + [-] (Default) or [Ctrl] + [F12] (Alternate).
BUTTON SETTINGS
Sets the Front Panel Pushbutton Switching Operation:
For details, see the comparison chart at the end of this table.
PORT DISPLAY DURATION
Sets the time a Port number is displayed on the monitor after a port
change. The user defined period is 0 to 255 seconds (3 secs. is default)
SCAN DURATION
Sets focus dwell per port as it cycles through in Auto Scan. Key in a value
from 0 to 255 seconds (5 secs. is default)
SCREEN BLANKER
Blanks the screen after a selected period of time and may be set for
password protection.
HOTKEY COMMAND
MODE
Enables / Disables the Hotkey Command function to avoid conflicts with
programs running on the computer.