IOGear GCS1804 - Manual (Page 23)

22 23
Hotkey sequence Result
[Scroll Lock], [Scroll Lock], [S], [Enter] Audio increments one port
[Scroll Lock] [Scroll Lock] [A] [Enter] Starts Auto Scan. The KVM cycles from port to port at the
default 5 second interval.
[Scroll Lock] [Scroll Lock] [A] [N ] [Enter] Starts Auto Scan. The KVM focus cycles from port to port
at N second intervals. [N] can be numbers 1 through 99 in
seconds
[Scroll Lock][Scroll Lock][D] Re-capture and store display’s DDC information onto
the KVM
Note: n is number of the port you wish to access, and must be used in both the two and four port KVMs