IOGear GCS1782G - Manual (Page 19)

19
Auto Scanning
The GCS1782G’s Auto Scan feature automatically cycles the KVM focus through the computer ports
at regular intervals. This allows you to monitor computer activity without having to switch from port
to port manually.
Note:
1. The n stands for the number of seconds that the GCS1782G should dwell on a port before
moving on to the next. Replace the n with a number between 1 and 99 when entering this hotkey
combination.
2. While Auto Scan Mode is in effect, ordinary keyboard and mouse functions are suspended – only
Auto Scan Mode compliant keystrokes and mouse clicks can be input. You must exit Auto Scan
Mode in order to regain normal control of the console (hit the space bar or the Esc key).
3. Although the video focus switches from port to port, the keyboard, mouse, and USB focus do not
switch. They remain on the port where Auto Scanning began.