IOGear GCS1724 - Manual (Page 9)

1
2
and / or
- 9 -
Hardware Installation
Before you Begin
Make sure that power to all the devices you will be
connecting have been turned off. You must unplug the
power cords of any computers that have the Keyboard
Power On function. Otherwise, the switch will receive power
from the computer.
To prevent damage to your installation, make sure that all
devices on the installation are properly grounded.
STEP 1
Plug your keyboard and mouse into the USB or PS/2
console ports located on the unit’s rear panel.
STEP 2
Plug your console monitor into the VGA console port
located in the unit’s rear panel and power on the monitor.