IOGear GCS104U - Manual (Page 15)

Auto Scan Mode
The MiniView
TM : USB Auto Scan feature automatically
switches among the attached computers at regular inter-
vals (3 or 15 seconds), so that you can monitor their activity
without having to take the trouble of switching ports your-
self.
To invoke Auto Scan Mode, simply press the Auto Scan
button (located on the MiniView
TM ’s front panel). The Auto
Scan LED will then flash to indicate that Auto Scan Mode is
enabled.
To turn Auto Scan Mode Off, press the Auto Scan button
again. The Auto Scan LED will stop flashing
when Auto Scan Mode is no longer in effect.
Note: While Auto Scan Mode is in effect, neither the
keyboard nor the mouse will function. You must turn off
Auto Scan Mode in order to be able to use the console.
Operation... Operation...
OperationOperation
11 11