BURY CP 1000 CarPhone USER Manual - Manual (Page 17)

17
8. Handling possibilities
The system can be operated in two ways:
1. Operation using voice control
2. Operating the menu using the keypad
9. Voice control
Voice control
The „VOICE COMMANDS“ are highlighted
in the further explanatory notes.
The menu items of the system can be selected using voice commands
once this function has been activated. There are exceptions, however,
when you still have to use navigation key scroll. During an active tele-
phone call, for instance, you can’t use voice commands. You have to
select any additional functions using the keypad.
To start the voice control feature, press this button. If the Magic Word
function is activated, you can also start the voice control by stating the
„ACTIVATE VOICE DIAL“ command. In certain situations, however,
with an incoming call and activated voice recognition for instance, the
BURY CP 1000 CarPhone will start the voice control system automati-
cally. The system signals that it is ready to receive a command by emit-
ting an acoustic signal.
If you aren’t sure of the right command to use, then simply state „HELP
/ WHAT CAN I SAY“. The BURY CP 1000 CarPhone will then read out
the commands available for the particular menu in which you currently
find yourself. If the BURY CP 1000 CarPhone fails to understand one of
your commands, or the particular option isn’t available, the help func-
tion will start automatically and list the possible commands. When en-
tering voice commands, please ensure you speak naturally, clearly and
at a regular speed.
Note:
With the use of the voice control it is recommended to X
turn down the volume of components which are independ-
ent of the audio system (e.g. a navigation system) or to
switch off the broadcast of traffic jam warnings in order to
avoid unintended voice entries.