BURY CP 1000 CarPhone USER Manual - Manual (Page 11)

11
5. Plug the cable for the BURY CP 1000 CarPhone into the electronic
box
Step 1:
Open the top cover of the
electronic box
Step 4:
Carefully close the top cover of the
electronic box, ensuring no wires
get trapped in the process Step 3:
Check that all components have
snapped firmly into place and gently
push down ensuring they are below
the level of the top cover position
Step 2:
Plug both jacks into the circuit board
Note the coding on the jack X
Ensure the jacks snap firmly X
into place